WhatsApp Support
Home /

Stoker Steam Boiler (with automatic fuel feeding system)

Stoker Front Furnace Boilers: Hot gases pass through the combustion chamber, which we call the first transition, and are transported to the front part towards the second smoke pipes. The gases passing through the front smoke box are collected here and go to the cyclone. After leaving the cyclone, it passes into the chimney and is ejected from there. Since it works with the principle of top burning, the coal burns completely and pollutes the environment at a minimum level.

The feed water of the boiler is heated in the front furnace and then enter to the boiler. This speeds up the steam production. Coal bin, loading and hull auger, coal silo, reducers that turn the auger, fresh air fan are the main elements of the system. Combustion takes place in the section we call the bin. The part that carries the coal to the boat is called the boat helix, the part that carries the coal to the silo is called the loading helix. Since the fuel is loaded into the boiler with a helix, the combustion takes place from the bottom and thus the combustion is complete and the unburned coal particles do not spread to the environment.

 
Technicial Specifications

 

Capacity Range 0-10 Tons / Hours of Steam
Pressure 0-15 Bar
Fuel 0-25 mm Coal
Advantage Low Investment Cost, Less Residential Area
 
Stay updated
You can follow our news by subscribing.
follow us
Factory Contact
Hacı Mustafa Mahallesi GMK Bulvarı No:140/A Adana Yolu Üzeri 7. km 46080 Onikişubat/Kahramanmaraş
Head Office
ATAKÖY 7-8-9-10. KISIM MAH ÇOBANÇEŞME E-5 YAN YOL CD BAKIRKÖY Route İstanbul, Blok B No.25
Hisarmak © 2024 All rights reserved.